Does Your Washing Machine Need to Be Repaired? Find Out Now

For many households, a washing machine is an essential appliance. It needs to be in perfect working order at all times because going any length of time without access to a properly working washing machine just is not acceptable. Therefore, you are going to want to make sure that you are well aware of the signs that indicate the need for a washing machine technician to check things out for you. Here are some signs of trouble to watch for:

Your Clothes Are Always Soaking Wet

Sure, your clothes are supposed to still be wet at the end of the final spin cycle. However, that final spin cycle was designed to get as much of the excess water out of your clothes as it can. When you pick up your clothes out of the washing machine, you should be able to tell that they are wet, but that should be about it. You should not be able to wring a bunch of water out of them, nor should you be able to see water dripping from the clothes as you put them in the dryer. Not only is this a sign that your washing machine is breaking down, but you could damage your dryer by forcing it to work twice as hard to dry your soaking wet clothes.

The Machine Is Always Bouncing Around

Beyond the small vibration that occurs when the washing machine goes through the various cycles, it should not move a lot. Therefore, if you are finding that the washing machine is always drastically moving around and you have to push it back a few inches every time you are done washing a load of clothes, you need to call in an expert. The problem might be something as simple as the washing drum needs to be tightened. However, ignoring the problem can cause the machine to wear out much quicker and then you will be stuck completely replacing it.

You Can't Use Half Of The Controls

While some washing machine models will have more than others, you should have a few different washing cycles to pick from. Should you find the one or more of those are not working, you will need to call in a washer repair technician. It could be something as simple as a broken knob or it could be that there is a bad wire somewhere in the control panel. Either way, it is an issue that you are going to want to have repaired right away.